CHART NAME: {{ .Chart.Name }}
CHART VERSION: {{ .Chart.Version }}
APP VERSION: {{ .Chart.AppVersion }}

{{- if .Values.diagnosticMode.enabled }}
The chart has been deployed in diagnostic mode. All probes have been disabled and the command has been overwritten with:

  command: {{- include "common.tplvalues.render" (dict "value" .Values.diagnosticMode.command "context" $) | nindent 4 }}
  args: {{- include "common.tplvalues.render" (dict "value" .Values.diagnosticMode.args "context" $) | nindent 4 }}

Get the list of pods by executing:

  kubectl get pods --namespace {{ .Release.Namespace }} -l app.kubernetes.io/instance={{ .Release.Name }}

Access the pod you want to debug by executing

  kubectl exec --namespace {{ .Release.Namespace }} -ti <NAME OF THE POD> -- bash

In order to replicate the container startup scripts execute this command:

    /opt/bitnami/scripts/kafka/entrypoint.sh /opt/bitnami/scripts/kafka/run.sh

{{- else }}

{{- $replicaCount := int .Values.replicaCount -}}
{{- $releaseNamespace := .Release.Namespace -}}
{{- $clusterDomain := .Values.clusterDomain -}}
{{- $fullname := include "common.names.fullname" . -}}
{{- $clientProtocol := include "kafka.listenerType" (dict "protocol" .Values.auth.clientProtocol) -}}
{{- $externalClientProtocol := include "kafka.listenerType" (dict "protocol" (include "kafka.externalClientProtocol" . )) -}}
{{- $saslMechanisms := .Values.auth.sasl.mechanisms -}}
{{- $tlsEndpointIdentificationAlgorithm := default "" .Values.auth.tls.endpointIdentificationAlgorithm -}}
{{- $tlsPasswordSecret := printf "$(kubectl get secret %s --namespace %s -o jsonpath='{.data.password}' | base64 --decode | cut -d , -f 1)" .Values.auth.tls.existingSecret $releaseNamespace -}}
{{- $tlsPassword :=  ternary .Values.auth.tls.password $tlsPasswordSecret (eq .Values.auth.tls.existingSecret "") -}}
{{- $servicePort := int .Values.service.ports.client -}}

{{- if and (or (eq .Values.service.type "LoadBalancer") .Values.externalAccess.enabled) (eq $externalClientProtocol "PLAINTEXT") }}
---------------------------------------------------------------------------------------------
 WARNING

    By specifying "serviceType=LoadBalancer" and not configuring the authentication
    you have most likely exposed the Kafka service externally without any
    authentication mechanism.

    For security reasons, we strongly suggest that you switch to "ClusterIP" or
    "NodePort". As alternative, you can also configure the Kafka authentication.

---------------------------------------------------------------------------------------------
{{- end }}

** Please be patient while the chart is being deployed **

Kafka can be accessed by consumers via port {{ $servicePort }} on the following DNS name from within your cluster:

    {{ $fullname }}.{{ $releaseNamespace }}.svc.{{ $clusterDomain }}

Each Kafka broker can be accessed by producers via port {{ $servicePort }} on the following DNS name(s) from within your cluster:

{{- $brokerList := list }}
{{- range $e, $i := until $replicaCount }}
{{- $brokerList = append $brokerList (printf "%s-%d.%s-headless.%s.svc.%s:%d" $fullname $i $fullname $releaseNamespace $clusterDomain $servicePort) }}
{{- end }}
{{ join "\n" $brokerList | nindent 4 }}
{{- if (include "kafka.client.saslAuthentication" .) }}

You need to configure your Kafka client to access using SASL authentication. To do so, you need to create the 'kafka_jaas.conf' and 'client.properties' configuration files with the content below:

    - kafka_jaas.conf:

KafkaClient {
{{- if $saslMechanisms | regexFind "scram" }}
org.apache.kafka.common.security.scram.ScramLoginModule required
{{- else }}
org.apache.kafka.common.security.plain.PlainLoginModule required
{{- end }}
username="{{ index .Values.auth.sasl.jaas.clientUsers 0 }}"
password="$(kubectl get secret {{ $fullname }}-jaas --namespace {{ $releaseNamespace }} -o jsonpath='{.data.client-passwords}' | base64 --decode | cut -d , -f 1)";
};

    - client.properties:

security.protocol={{ $clientProtocol }}
{{- if $saslMechanisms | regexFind "scram-sha-256" }}
sasl.mechanism=SCRAM-SHA-256
{{- else if $saslMechanisms | regexFind "scram-sha-512" }}
sasl.mechanism=SCRAM-SHA-512
{{- else }}
sasl.mechanism=PLAIN
{{- end }}
{{- if eq $clientProtocol "SASL_SSL" }}
ssl.truststore.type={{ upper .Values.auth.tls.type }}
    {{- if eq .Values.auth.tls.type "jks" }}
ssl.truststore.location=/tmp/kafka.truststore.jks
        {{- if not (empty $tlsPassword) }}
ssl.truststore.password={{ $tlsPassword }}
        {{- end }}
    {{- else if eq .Values.auth.tls.type "pem" }}
ssl.truststore.certificates=-----BEGIN CERTIFICATE----- \
... \
-----END CERTIFICATE-----
    {{- end }}
    {{- if eq $tlsEndpointIdentificationAlgorithm "" }}
ssl.endpoint.identification.algorithm=
    {{- end }}
{{- end }}

{{- else if (include "kafka.client.tlsEncryption" .) }}

You need to configure your Kafka client to access using TLS authentication. To do so, you need to create the 'client.properties' configuration file with the content below:

security.protocol={{ $clientProtocol }}
ssl.truststore.type={{ upper .Values.auth.tls.type }}
{{- if eq .Values.auth.tls.type "jks" }}
ssl.truststore.location=/tmp/kafka.truststore.{{ .Values.auth.tls.type }}
    {{- if not (empty $tlsPassword) }}
ssl.truststore.password={{ $tlsPassword }}
    {{- end }}
{{- else if eq .Values.auth.tls.type "pem" }}
ssl.truststore.certificates=-----BEGIN CERTIFICATE----- \
... \
-----END CERTIFICATE-----
{{- end }}
{{- if eq .Values.auth.clientProtocol "mtls" }}
ssl.keystore.type={{ upper .Values.auth.tls.type }}
    {{- if eq .Values.auth.tls.type "jks" }}
ssl.keystore.location=/tmp/client.keystore.jks
        {{- if not (empty $tlsPassword) }}
ssl.keystore.password={{ $tlsPassword }}
        {{- end }}
    {{- else if eq .Values.auth.tls.type "pem" }}
ssl.keystore.certificate.chain=-----BEGIN CERTIFICATE----- \
... \
-----END CERTIFICATE-----
ssl.keystore.key=-----BEGIN ENCRYPTED PRIVATE KEY----- \
... \
-----END ENCRYPTED PRIVATE KEY-----
    {{- end }}
{{- end }}
{{- if eq $tlsEndpointIdentificationAlgorithm "" }}
ssl.endpoint.identification.algorithm=
{{- end }}

{{- end }}

To create a pod that you can use as a Kafka client run the following commands:

    kubectl run {{ $fullname }}-client --restart='Never' --image {{ template "kafka.image" . }} --namespace {{ $releaseNamespace }} --command -- sleep infinity
    {{- if or (include "kafka.client.saslAuthentication" .) (include "kafka.client.tlsEncryption" .) }}
    kubectl cp --namespace {{ $releaseNamespace }} /path/to/client.properties {{ $fullname }}-client:/tmp/client.properties
    {{- end }}
    {{- if (include "kafka.client.saslAuthentication" .) }}
    kubectl cp --namespace {{ $releaseNamespace }} /path/to/kafka_jaas.conf {{ $fullname }}-client:/tmp/kafka_jaas.conf
    {{- end }}
    {{- if and (include "kafka.client.tlsEncryption" .) (eq .Values.auth.tls.type "jks") }}
    kubectl cp --namespace {{ $releaseNamespace }} ./kafka.truststore.jks {{ $fullname }}-client:/tmp/kafka.truststore.jks
    {{- if eq .Values.auth.clientProtocol "mtls" }}
    kubectl cp --namespace {{ $releaseNamespace }} ./client.keystore.jks {{ $fullname }}-client:/tmp/client.keystore.jks
    {{- end }}
    {{- end }}
    kubectl exec --tty -i {{ $fullname }}-client --namespace {{ $releaseNamespace }} -- bash
    {{- if (include "kafka.client.saslAuthentication" .) }}
    export KAFKA_OPTS="-Djava.security.auth.login.config=/tmp/kafka_jaas.conf"
    {{- end }}

    PRODUCER:
        kafka-console-producer.sh \
            {{ if or (include "kafka.client.saslAuthentication" .) (include "kafka.client.tlsEncryption" .) }}--producer.config /tmp/client.properties \{{ end }}
            --broker-list {{ join "," $brokerList }} \
            --topic test

    CONSUMER:
        kafka-console-consumer.sh \
            {{ if or (include "kafka.client.saslAuthentication" .) (include "kafka.client.tlsEncryption" .) }}--consumer.config /tmp/client.properties \{{ end }}
            --bootstrap-server {{ $fullname }}.{{ $releaseNamespace }}.svc.{{ $clusterDomain }}:{{ .Values.service.ports.client }} \
            --topic test \
            --from-beginning

{{- if .Values.externalAccess.enabled }}

To connect to your Kafka server from outside the cluster, follow the instructions below:

{{- if eq "NodePort" .Values.externalAccess.service.type }}
{{- if .Values.externalAccess.service.domain }}

    Kafka brokers domain: Use your provided hostname to reach Kafka brokers, {{ .Values.externalAccess.service.domain }}

{{- else }}

    Kafka brokers domain: You can get the external node IP from the Kafka configuration file with the following commands (Check the EXTERNAL listener)

        1. Obtain the pod name:

        kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ template "kafka.name" . }},app.kubernetes.io/instance={{ .Release.Name }},app.kubernetes.io/component=kafka"

        2. Obtain pod configuration:

        kubectl exec -it KAFKA_POD -- cat /opt/bitnami/kafka/config/server.properties | grep advertised.listeners

{{- end }}

    Kafka brokers port: You will have a different node port for each Kafka broker. You can get the list of configured node ports using the command below:

        echo "$(kubectl get svc --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ template "kafka.name" . }},app.kubernetes.io/instance={{ .Release.Name }},app.kubernetes.io/component=kafka,pod" -o jsonpath='{.items[*].spec.ports[0].nodePort}' | tr ' ' '\n')"

{{- else if contains "LoadBalancer" .Values.externalAccess.service.type }}

  NOTE: It may take a few minutes for the LoadBalancer IPs to be available.
        Watch the status with: 'kubectl get svc --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ template "kafka.name" . }},app.kubernetes.io/instance={{ .Release.Name }},app.kubernetes.io/component=kafka,pod" -w'

    Kafka Brokers domain: You will have a different external IP for each Kafka broker. You can get the list of external IPs using the command below:

        echo "$(kubectl get svc --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ template "kafka.name" . }},app.kubernetes.io/instance={{ .Release.Name }},app.kubernetes.io/component=kafka,pod" -o jsonpath='{.items[*].status.loadBalancer.ingress[0].ip}' | tr ' ' '\n')"

    Kafka Brokers port: {{ .Values.externalAccess.service.ports.external }}

{{- end }}

{{- if not (eq $clientProtocol $externalClientProtocol) }}
{{- if (include "kafka.client.saslAuthentication" .) }}

You need to configure your Kafka client to access using SASL authentication. To do so, you need to create the 'kafka_jaas.conf' and 'client.properties' configuration files with the content below:

    - kafka_jaas.conf:

KafkaClient {
{{- if $saslMechanisms | regexFind "scram" }}
org.apache.kafka.common.security.scram.ScramLoginModule required
{{- else }}
org.apache.kafka.common.security.plain.PlainLoginModule required
{{- end }}
username="{{ index .Values.auth.sasl.jaas.clientUsers 0 }}"
password="$(kubectl get secret {{ $fullname }}-jaas --namespace {{ $releaseNamespace }} -o jsonpath='{.data.client-passwords}' | base64 --decode | cut -d , -f 1)";
};

    - client.properties:

security.protocol={{ $externalClientProtocol }}
{{- if $saslMechanisms | regexFind "scram-sha-256" }}
sasl.mechanism=SCRAM-SHA-256
{{- else if $saslMechanisms | regexFind "scram-sha-512" }}
sasl.mechanism=SCRAM-SHA-512
{{- else }}
sasl.mechanism=PLAIN
{{- end }}
{{- if eq $externalClientProtocol "SASL_SSL" }}
ssl.truststore.type={{ upper .Values.auth.tls.type }}
    {{- if eq .Values.auth.tls.type "jks" }}
ssl.truststore.location=/tmp/kafka.truststore.jks
        {{- if not (empty $tlsPassword) }}
ssl.truststore.password={{ $tlsPassword }}
        {{- end }}
    {{- else if eq .Values.auth.tls.type "pem" }}
ssl.truststore.certificates=-----BEGIN CERTIFICATE----- \
... \
-----END CERTIFICATE-----
    {{- end }}
    {{- if eq $tlsEndpointIdentificationAlgorithm "" }}
ssl.endpoint.identification.algorithm=
    {{- end }}
{{- end }}

{{- else if (include "kafka.externalClient.tlsEncryption" .) }}

You need to configure your Kafka client to access using TLS authentication. To do so, you need to create the 'client.properties' configuration file with the content below:

security.protocol={{ $externalClientProtocol }}
ssl.truststore.type={{ upper .Values.auth.tls.type }}
{{- if eq .Values.auth.tls.type "jks" }}
ssl.truststore.location=/tmp/kafka.truststore.{{ .Values.auth.tls.type }}
    {{- if not (empty $tlsPassword) }}
ssl.truststore.password={{ $tlsPassword }}
    {{- end }}
{{- else if eq .Values.auth.tls.type "pem" }}
ssl.truststore.certificates=-----BEGIN CERTIFICATE----- \
... \
-----END CERTIFICATE-----
{{- end }}
{{- if eq .Values.auth.externalClientProtocol "mtls" }}
ssl.keystore.type={{ upper .Values.auth.tls.type }}
    {{- if eq .Values.auth.tls.type "jks" }}
ssl.keystore.location=/tmp/client.keystore.jks
        {{- if not (empty $tlsPassword) }}
ssl.keystore.password={{ $tlsPassword }}
        {{- end }}
    {{- else if eq .Values.auth.tls.type "pem" }}
ssl.keystore.certificate.chain=-----BEGIN CERTIFICATE----- \
... \
-----END CERTIFICATE-----
ssl.keystore.key=-----BEGIN ENCRYPTED PRIVATE KEY----- \
... \
-----END ENCRYPTED PRIVATE KEY-----
    {{- end }}
{{- end }}
{{- if eq $tlsEndpointIdentificationAlgorithm "" }}
ssl.endpoint.identification.algorithm=
{{- end }}

{{- end }}
{{- end }}
{{- end }}
{{- end }}

{{- include "kafka.checkRollingTags" . }}
{{- include "kafka.validateValues" . }}
